Sending Peppol documents in Norway for your own company

This guide walks through everything needed to exchange Peppol documents for a company registered in Norway, assuming you are setting up your own Norwegian company, and that the company only sends documents over Peppol. Change any of the three answers at the top of the page to get the guide for a different situation.

What you are setting upCopy Anchor Link

You are putting one company, your own or one you represent, on the Peppol network, so it can exchange invoices electronically with its customers and suppliers.

The setup is a one-time affair: registering the company and getting it verified takes a few minutes in the Recommand dashboard, and there is nothing to gain from automating something you do once. What you do integrate is the part that repeats: sending and receiving documents. Our existing integrations can also connect Recommand to accounting or invoicing software you already use, with no code at all.

A single team can hold several companies at no extra cost, useful if you run more than one legal entity, and the document volume of all of them counts towards one plan.

Peppol in NorwayCopy Anchor Link

Norway is one of the oldest Peppol countries: public sector buyers have required EHF invoices for years, and EHF Billing 3.0 is Peppol BIS Billing 3.0. Documents are exchanged as Peppol BIS 3 UBL over the standard Peppol billing process, through Recommand's own access point.

What is specific to Norway:

• A B2B mandate in two steps. From 1 January 2027, businesses with a bookkeeping obligation must issue e-invoices to other such businesses. Until receiving becomes mandatory as well, on 1 January 2030, the obligation in practice applies when the buyer can receive them, which means being registered in ELMA or on Peppol.
• Receivers are registered in ELMA. ELMA (Elektronisk mottakeradresseregister) is the Norwegian receiver register, run by the Norwegian Digitalisation Agency. Norwegian companies that receive through Recommand are published there rather than on Recommand's own SMP. Senders find them the usual way, through the Peppol network.
• The organisation number is the Peppol address. Norwegian companies are published under scheme 0192 with their 9-digit organisasjonsnummer, so a Norwegian Peppol address looks like 0192:123456785.
• Organisations are checked against Enhetsregisteret. An organisation number that the Norwegian register of legal entities does not know, or has deleted, is not registered as a receiver, and a registration is removed when the organisation is deleted from the register later.
• Representatives are checked for signing authority. During verification, the representative is held against the people Enhetsregisteret lists as able to sign for the company or holding procuration.

Create your account and API credentialsCopy Anchor Link

1. Sign up at app.recommand.eu/signup.
2. Your account starts with a team. The team holds your company, your subscription and your document history, and you can invite colleagues to it.
3. Create an API key on the API keys page. Note the key, the secret and your team ID.
4. Check the credentials with a request that needs no data of its own:

curl -X GET https://app.recommand.eu/api/core/auth/verify \
  -u key_xxx:secret_xxx

It answers {"success": true} when the key and secret are accepted, and 401 when they are not, so it tells you about your credentials and nothing else.

All endpoints in this guide live under https://app.recommand.eu/api/v1 and accept HTTP Basic authentication with the key as username and the secret as password. If you would rather not store a long-lived secret, JWT API keys and OAuth2 with a JWT assertion are available too, see the authentication guide.

Try it safely firstCopy Anchor Link

You do not have to get anything right the first time. Everything below, adding the company, registering it, sending and receiving, can be done in a playground team first, where nothing is delivered over the real Peppol network, nothing is registered on it, and nothing is billed.

Open the team switcher at the top of the dashboard and pick Add playground. Give it a name, leave the Peppol Test Network box unticked, and you are switched into the new team straight away. There is nothing to set up beyond that.

Add a company to that team and use it as both sender and recipient to watch a document travel end to end. When the flow does what you want, repeat it once in your real team.

Two things worth knowing before you start:

• POST /:companyId/generate takes the same body as the send endpoint minus the email delivery options, which have no meaning when nothing is delivered, and returns the exact XML that sending would produce, fully validated, without transmitting, storing or billing it. Raw XML is not accepted here: there is nothing to generate from a document you already have. It also returns the resolved documentType, doctypeId and processId.
• Failure addresses. In a playground that is not connected to the Peppol Test Network, sending to 404:404 or 0208:1234567894 always fails, so you can exercise your error handling. Any other unregistered recipient is skipped without an error.

A playground stays useful after you are live, too: it is the safest place to try a new invoice layout or a new integration. See how can I test without sending real invoices.

Register the companyCopy Anchor Link

You are registering one company, once, so the dashboard is the shortest path.

1. Open Companies and start the company wizard.
2. Fill in the legal name, address and country, plus the identifiers described in the next section.
3. Choose whether the company should also receive documents over Peppol, or only send them.
4. Save. The company is registered on the Peppol network as part of this step: its identifiers and the document types for its country are set up for you.

Right after saving, the dashboard offers the verification step, which the section below covers. Note the company's ID from its detail page. Every API call for sending and receiving takes it in the path.

Norwegian identifiers and Peppol addressCopy Anchor Link

{
  "name": "Eksempel AS",
  "address": "Storgata 1",
  "postalCode": "0155",
  "city": "Oslo",
  "country": "NO",
  "enterpriseNumber": "123456785",
  "vatNumber": "NO123456785MVA"
}

The organisation number is checked against its format and its check digit (modulo 11), and registered as the company's Peppol identifier: 0192: followed by the organisation number. The VAT number is written into the documents the company sends, but it is not registered as a Peppol identifier.

Only 0192 in ELMACopy Anchor Link

ELMA registers Norwegian organisation numbers and nothing else. A Norwegian company registered in ELMA therefore carries 0192 identifiers only: adding an identifier under another scheme, such as a GLN (0088), is refused with an error that names the scheme. Without an organisation number the company has no Peppol address, so enterpriseNumber is effectively required in Norway.

The organisation has to existCopy Anchor Link

Before a 0192 identifier is published as a receiver on the production network, the organisation number is looked up in Enhetsregisteret:

• a number the register does not know is refused, with a message that says so;
• a number the register has deleted is refused, with the date it was deleted.

When an organisation is deleted from Enhetsregisteret later, its 0192 identifier is removed and the company stops receiving on it. The team members get an email about it.

On the test network, organisation numbers are not looked up, so you can test with synthetic organisations.

Registering for sending onlyCopy Anchor Link

Because you are only looking to send invoices or other documents, register the company without recipient registration: set isSmpRecipient to false (or leave the checkbox unticked in the dashboard).

{
  "isSmpRecipient": false
}

What that means:

• The company is not published as a recipient on an SMP, so nothing is delivered to it over Peppol through your integration.
• Registration succeeds even when the company already receives its documents through another Peppol provider. The other Peppol provider will remain in charge for processing received documents for this company.
• Nothing changes for sending: outgoing documents leave through the access point as normal.

Verify the companyCopy Anchor Link

A company cannot exchange documents on Peppol until an authorised representative has confirmed their identity. The company object exposes this as isVerified, and it stays false until the check is done.

For Norwegian companies, the representative's authority is held against Enhetsregisteret:

1. Open the verification URL (from the create-company response, the dashboard, or a fresh one from the verify company endpoint).
2. Pick your name from the list. The list shows the people Enhetsregisteret names for signature (signatur) or procuration (prokura). Someone who is not on it cannot verify the company and is asked to contact support@recommand.eu. When the register lists nobody, the representative types their name instead, and it is checked the same way.
3. Complete the identity check. When the representative may act for the company alone, isVerified flips to true and the company is published in ELMA.

Of the people on the list, a representative may act alone when the register says they can sign or hold procuration on their own, or when they hold a role with full rights, such as general manager (daglig leder), chair of the board (styrets leder) or owner of a sole proprietorship (innehaver).

When the register cannot settle itCopy Anchor Link

Some cases need a person to look at them, for example a board member who may only sign together with others, or a register entry that cannot be interpreted. The identity check still runs, and the verification is then held for review by our team: isVerified stays false until it is decided, and the representative is told so during the verification.

Verifying once, in the dashboardCopy Anchor Link

You have one company, and it is verified once. There is nothing here worth automating: open Companies in the dashboard, pick the company and start verification. If you are authorised to act for the company, complete the check yourself; otherwise use the button to forward the link to whoever is.

The page is self-contained and works in any browser. The person completing it does not need a Recommand account.

That is the whole step. From here on the API takes over: sending and receiving documents is what you actually integrate.

Pick the document formatCopy Anchor Link

Send Peppol BIS 3 UBL, over the standard Peppol billing process. EHF Billing 3.0, the Norwegian invoice format, is Peppol BIS Billing 3.0, so there is no separate Norwegian document type to select:

Peppol BIS 3 has a rule of its own for Norwegian sellers: a VAT number, when there is one, has to be written as NO + organisation number + MVA, for example NO123456785MVA.

Before a first send to a new recipient, check that the recipient exists with the verify endpoint. That lookup also tells you whether a Norwegian buyer can receive e-invoices over Peppol at all.

Send a documentCopy Anchor Link

One endpoint sends everything: POST /:companyId/send. The companyId is the sender, recipient is the Peppol address of the receiver, and document is the invoice or credit note as JSON. Recommand will validate the document and generate the XML.

curl -X POST https://app.recommand.eu/api/v1/{companyId}/send \
  -u key_xxx:secret_xxx \
  -H "Content-Type: application/json" \
  -d @send-invoice.json

{
  "recipient": "0208:0123456789",
  "documentType": "invoice",
  "document": {
    "invoiceNumber": "INV-2026-001",
    "issueDate": "2026-08-17",
    "dueDate": "2026-09-16",
    "currency": "EUR",
    "buyer": {
      "name": "Customer Company",
      "street": "Customer Street 1",
      "city": "Antwerp",
      "postalZone": "2000",
      "country": "BE",
      "vatNumber": "BE0987654321"
    },
    "paymentMeans": [{ "iban": "BE68539007547034" }],
    "lines": [
      {
        "name": "Consulting Services",
        "quantity": "10.00",
        "unitCode": "HUR",
        "netPriceAmount": "100.00",
        "vat": { "category": "S", "percentage": "21.00" }
      }
    ]
  }
}

The seller block is filled in from your company when you leave it out, which is usually what you want: it keeps your registered identifiers and the document in agreement. The full field reference lives in sending invoices and sending credit notes.

Worth wiring up while you are here:

• Validation errors. Outgoing documents are always validated. A success: false response with errors keyed by field path is a document the recipient would have rejected. Surface it wherever the data was typed.
• Delivery outcomes. success: true confirms the send request succeeded. Check deliveryStatus and deliveries, and subscribe to delivery status webhooks for outcomes reported later.
• Email fallback. Pass email.to with when: "on_peppol_failure" to fall back to email on Peppol failure, including one reported after the send returns, or send with recipient: null for email-only delivery. See email delivery and notifications.
• PDFs. pdfGeneration.enabled attaches a generated PDF of the document. You can also attach an existing PDF (or other files) via attachments; see adding attachments.

For a full field reference, see sending invoices and sending credit notes.

Sending without writing codeCopy Anchor Link

The same send is available two other ways, and they mix freely with the API:

• From the dashboard. Send document takes the recipient and the invoice lines, previews what the recipient will get, and remembers your usual settings. You can also drop an existing UBL or CII XML file into the upload zone if your software already produces one.
• From your accounting or invoicing software. If you use one of the supported tools, let it do the work: your invoices flow to Recommand and out over Peppol without retyping. See integrations for the current list, including Microsoft Business Central, Exact Online, Yuki, ClearFacts, ERPNext and Harvest.

Going liveCopy Anchor Link

A short list before you start sending or receiving real invoices:

• A valid subscription, so sending is not blocked. Playgrounds skip that check; production does not.
• The company verified, with isVerified true. Until then it cannot exchange documents.
• Errors surfaced, not swallowed. Validation errors name the field that is wrong; put that in front of whoever can fix it rather than logging it.
• Webhook endpoint hardened, if you took that route: signature verification, a fast 200, retries and idempotency on your side.
• One real document sent and received, ideally between two companies you control, so you have seen both ends.
• Notification addresses set, so incoming documents also reach a mailbox somebody reads.

Where to get helpCopy Anchor Link

• Troubleshooting. Common rejections, delivery failures and validation errors are collected in the troubleshooting guide.
• Questions. The FAQ covers Peppol, addressing, VAT and billing.
• Email. support@recommand.eu:include the company ID and, for a delivery problem, the document ID.
• Discord. Join the server for release announcements and quick questions.
• Keep track of changes. New endpoints and behaviour are recorded in the changelog.

Other guides for Norway

• Sending Peppol documents in Norway for the companies you onboard
• Receiving Peppol documents in Norway for the companies you onboard
• Sending and receiving Peppol documents in Norway for the companies you onboard
• Receiving Peppol documents in Norway for your own company
• Sending and receiving Peppol documents in Norway for your own company